Setting up a Bitaxe miner is one of the easiest ways to start solo Bitcoin mining from home. Whether you just received a Bitaxe Touch, Bitaxe Gamma 601, Bitaxe Supra Hex 701, or any other model, this complete bitaxe setup guide will walk you through the entire process step by step. You will be hashing Bitcoin within five minutes of unboxing.

What You Need Before Your Bitaxe Setup

Before starting your bitaxe setup, gather these essentials: your bitaxe solo miner, a compatible bitaxe power supply (USB-C 5V for single-chip models or 12V for multi-chip bitaxe miners like the Supra Hex), a WiFi network with internet access, a Bitcoin wallet address, and a phone or computer with a web browser.

Step 1: Connect Your Bitaxe Power Supply

Plug your bitaxe power supply into the miner. For USB-C models like the Bitaxe Touch, Bitaxe Ultra, or Bitaxe Gamma 601, any quality 5V USB-C adapter with at least 2A output works perfectly. For larger bitaxe miners like the Bitaxe Supra Hex 701 or NerdOCTaxe, use the included 12V DC adapter. Once powered, LEDs light up and the device creates its own WiFi hotspot.

Step 2: Connect to the Bitaxe WiFi

On your phone or computer, look for a WiFi network named "Bitaxe" or "AxeOS" and connect to it. No password is needed on first setup. Open your browser and go to 192.168.4.1 — this is the default bitaxe setup interface where you configure everything.

Step 3: Configure WiFi and Mining Pool

In the AxeOS web interface, enter your home WiFi credentials and save. The Bitaxe reboots and connects to your network. Find its new IP address through your router or a network scanner, then navigate to the Mining settings page. For solo mining, use public-pool.io on port 21496 with your Bitcoin wallet address as the username. Click save and your bitaxe solo miner starts hashing immediately.

Step 4: Monitor and Display

The AxeOS dashboard shows real-time hashrate, chip temperature, accepted shares, and uptime. For a clean desktop display, mount your miner on a bitaxe stand. The Bitaxe Touch even has a built-in touchscreen showing live stats — a perfect desk companion.

Bitaxe Gamma 601 Setup Tips

The bitaxe gamma 601 setup follows the same steps but has specific notes. It uses a 5V USB-C bitaxe power supply and features the BM1370 chip producing 1.2 TH/s at 17W. The bitaxe gamma heatsink comes pre-installed with an active fan — ensure clearance for airflow. The AxeOS firmware web interface is identical across all models.

Bitaxe Supra Hex 701 Setup Tips

The Bitaxe Supra Hex 701 (also called bitaxe suprahex) requires a 12V power supply for its six BM1366 chips producing 4.2 TH/s. It generates more heat, so place it on a bitaxe stand in a ventilated area. The dashboard displays individual stats for all six chips.

Bitaxe Gamma Profitability

Understanding bitaxe gamma profitability requires realistic expectations. Solo mining is a probability game — a Bitcoin lottery. At 1.2 TH/s (Gamma 601) or 2.5 TH/s (Bitaxe Gamma Turbo), electricity costs are pennies per day. If you solve a block, you earn the entire reward with zero pool fees. The bitaxe gamma hash rate power consumption ratio makes these devices extremely cost-effective lottery tickets running 24/7.

Bitaxe Ultra Hash Rate

The bitaxe ultra hash rate of 425 Gh/s at 11W makes it the most energy-efficient model. While lower hashrate than Gamma or Supra Hex models, it costs practically nothing to operate and runs in complete silence with passive cooling.

Ready to Start Solo Mining?

Now that you know the complete bitaxe setup process, pick the right bitaxe solo miner for your needs. CaptainMining ships all bitaxe miners fast across Canada and worldwide:

• Bitaxe Touch 1.6TH/s — touchscreen, silent
• Bitaxe Gamma 601 — 1.2 TH/s BM1370
• Bitaxe Gamma Turbo 2.5TH/s — max single-chip
• Bitaxe Supra Hex 701 — 4.2 TH/s hex
• Bitaxe Ultra 1366 — 11W ultra-low power

Browse our full Bitcoin solo miner collection and start mining today!