Bitmain Antminer KS7 40Th/s – KHeavyHash Kaspa ASIC Miner 3080W

No. It is a single-algorithm ASIC miner (kHeavyHash) optimized for Kaspa. The Bitmain Antminer KS7 delivers an industry-leading hashrate of 40 TH/s on the kHeavyHash algorithm, making it the most powerful dedicated Kaspa ASIC miner available. The KS7 power consumption sits at approximately 3080 watts with a tolerance of plus or minus five percent at 25 degrees Celsius. This gives the Antminer KS7 40T an outstanding energy efficiency ratio of roughly 77 joules per terahash, nearly twice as efficient as the KS5 Pro. Whether you are building a professional Kaspa mining farm or adding a single unit to your existing setup, the Bitmain Antminer KS7 provides unmatched hashing performance for KAS mining.

Possibly, if you have a dedicated 240 V circuit and can manage ~3 kW of The Bitmain Antminer KS7 can technically be used at home, but it requires careful planning due to its significant power and noise output. You will need a dedicated 220-240 V electrical circuit capable of handling over 3 kilowatts of continuous draw, along with proper ventilation to dissipate heat. The KS7 produces approximately 75 decibels of noise at full load, which is comparable to a running vacuum cleaner, so placing it in a garage, basement, or insulated room is strongly recommended. Home miners should also factor in their local electricity rate when calculating Antminer KS7 profitability to ensure positive returns from Kaspa mining.

Noise levels are estimated around 75 dB under full load, which is roughly The Bitmain Antminer KS7 produces an estimated noise level of around 75 decibels during full-load operation, which is roughly equivalent to a running vacuum cleaner or a busy city street. This noise level makes the KS7 unsuitable for placement in a living area, bedroom, or home office. Most operators install their Antminer KS7 units in dedicated mining rooms, garages, basements, or commercial data centers where sound insulation can be applied. Using acoustic panels, enclosed cabinets, or immersion cooling systems can help reduce the perceived noise. Planning for adequate noise management is essential when setting up your Bitmain Antminer KS7 mining operation.

The KS7 (77 J/TH) vastly outperforms GPU setups on kHeavyHash mining The Bitmain Antminer KS7 achieves an energy efficiency of approximately 77 joules per terahash, which vastly outperforms even the best GPU-based kHeavyHash mining rigs. A typical high-end GPU setup mining Kaspa might achieve 500 to 1000 J/TH or more, meaning the KS7 is roughly ten times more power-efficient. This dramatic improvement translates directly into lower electricity bills and higher profit margins per terahash of mining output. For serious Kaspa miners, the Antminer KS7 ASIC eliminates the need for multi-GPU builds, reduces cooling requirements, and delivers far more consistent hashing performance around the clock compared to consumer graphics cards.

The Bitmain Antminer KS7 is built exclusively for the kHeavyHash algorithm, the proof-of-work function that secures the Kaspa blockchain. This means the KS7 mines Kaspa (KAS) coins and cannot be used to mine Bitcoin, Litecoin, or any other cryptocurrency running a different algorithm. Kaspa stands out for its blockDAG architecture that allows multiple blocks to be created simultaneously, resulting in extremely fast confirmation times. With 40 TH/s of dedicated kHeavyHash hashing power, the Bitmain Antminer KS7 40T is designed to dominate Kaspa mining pools and generate maximum KAS rewards for both individual and professional mining operations.